|
DiptraceDiptrace
|
NUC front panel XLR key
Quite a while ago I bought a number of second hand Intel NUCs to create a Proxmox cluster. It sat as a stack on my desk and it was annoying to turn on and off and was a complete mess of spaghetti wires.
To remedy I bought a 10 inch rack from GeeekPi and so began my journey to make it more usable and neater that the mess on my desk.
One of the things I really wanted was to have a front panel so I could stack the NUCs neatly in the rack and not have to move them about to turn them off and on.
NUC front panel XLR key
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Michael Fong
-
NUC front panel XLR key
Quite a while ago I bought a number of second hand Intel NUCs to create a Proxmox cluster. It sat as...
-
MiSTer C64 IEC and C128 Keyboard Adapter
This is an expensive and very niche way to get a board to add to your MiSTer stack that implementsth...
-
ATF1504AS(L) CPLD Development Board
A simple development board for the ATF1504AS(L) CPLDhttp://8bitshardway.blogspot.com/2020/05/atmel-a...
-
TMS2532 (AT28HC64B) Adapter
This is the adapter board "TMS2532 (AT28HC64B) Adapter" ONLY.You need it to program the following EE...
-
TMS2532 (AT28HC64B)
This is a replacement for the TMS2532 using an AT28HC64B EEPROM.There is an adapter board also "TMS2...
-
-
MIDI FORGE Maestro - Wavetable Board emulated using Raspberry Pi Zero 2W
302 0 2 -
-
