MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
Introduction
The MPL3115A2 is a highly accurate, low-power digital barometric pressure sensor from NXP Semiconductors. It is designed to measure barometric pressure, altitude, and temperature, making it a versatile sensor for a wide range of applications, including weather stations, drones, altimeters, and indoor navigation systems.
For Full Project:
Key Features
Pressure Measurement:
Range: 20 kPa to 110 kPa.
Resolution: 0.1 Pa (Pascals).
Accuracy: ±0.4 kPa (typical).
Altitude Measurement:
Range: -698 m to 11,775 m (relative to sea level).
Resolution: 0.3 m (meters).
Temperature Measurement:
Range: -40°C to +85°C.
Resolution: 0.1°C.
Interface:
I2C (up to 400 kHz) or SPI for communication.
I2C address: 0x60 (default).
Power Supply:
Operating voltage: 1.95V to 3.6V.
Low power consumption: Ideal for battery-powered devices.
Package:
Small 8-pin DFN (Dual Flat No-leads) package (3 mm x 5 mm x 1.1 mm).
How It Works
The MPL3115A2 uses a MEMS (Micro-Electro-Mechanical Systems) piezoresistive sensor to measure atmospheric pressure. The pressure data is then converted into altitude using the International Barometric Formula. The sensor also includes an integrated temperature sensor for compensation and standalone temperature measurements.
Key Components
Pressure Sensor: Measures absolute pressure.
ADC (Analog-to-Digital Converter): Converts analog pressure and temperature data into digital values.
Digital Signal Processor (DSP): Processes the data and provides altitude, pressure, and temperature readings.
I2C/SPI Interface: Communicates with microcontrollers or other devices.
Comparison with Other Sensors
FeatureMPL3115A2BMP180BMP280MS5611Pressure Range20–110 kPa30–110 kPa30–110 kPa10–120 kPaAltitude Resolution0.3 m0.17 m0.16 m0.12 mInterfaceI2C, SPII2CI2C, SPII2C, SPIPower ConsumptionLowLowVery LowLowPackage Size3 mm x 5 mm3.6 mm x 3.8 mm2.0 mm x 2.5 mm5.0 mm x 3.0 mm
Manufacturing Files
PCB Files
Applications
The MPL3115A2 is widely used in applications that require precise environmental sensing:
Weather Stations: Measure barometric pressure and temperature.
Drones and UAVs: Altitude tracking and stabilization.
Smartphones and Wearables: Altitude and weather data for fitness tracking.
Indoor Navigation: Floor-level detection in buildings.
Industrial Systems: Pressure monitoring in HVAC systems or industrial equipment.
Advantages
High Accuracy: Provides precise pressure, altitude, and temperature measurements.
Low Power: Suitable for battery-operated devices.
Compact Size: Small form factor for space-constrained designs.
Ease of Integration: Simple I2C or SPI interface for communication.
Arduino and MPL3115A2
The MPL3115A2 sensor, combined with an Arduino, opens up a wide range of possibilities for projects involving barometric pressure, altitude, and temperature measurements. Whether you’re building a weather station, a drone, or an indoor navigation system, the MPL3115A2 is a versatile and accurate sensor that can provide valuable environmental data.
For Full Project:
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
-
Engineer Mar 16,2025
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Rabin Poudel
-
Arduino-based Mist Maker and Hand Dryer IntroductionIn today’s world, automation and hygiene have become essential, especially in public pla...
-
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor IntroductionThe MPL3115A2 is a highly accurate, low-power digital barometric pressure sensor from NX...
-
E-Speaker Using ESP32 IntroductionThe E-Speaker is a smart, portable, and versatile audio system built using the ESP32 mic...
-
Heart Rate Monitor Circuit Using Photoplethysmography (PPG) IntroductionHeart rate is a vital physiological parameter that reflects the health and fitness of an...
-
Automated Greenhouse Control System using ESP32 IntroductionAn automated greenhouse control system leverages technology to optimize plant growth con...
-
STD CH330N USB to Serial Converter 5V IntroductionThe CH330N is a versatile USB-to-serial converter chip that simplifies interfacing betwe...
-
KY-032 Obstacle avoidance sensor module IntroductionIntroduction to Obstacle Avoidance SensorsObstacle avoidance sensors are essential compo...
-
BC547 BASED WATER LEVEL INDICATOR IntroductionA water level indicator using a BC547 transistor is a simple and effective electronic pr...
-
How to Design Own Arduino Wifi shield PCB OverviewArduino wifi shield connects the Arduino with a wifi chip through the serial communication p...
-
DIY Air Quality Tester OverviewIn this project “DIY Air Quality Tester” we use Node MCU microcontroller and air quality sen...
-
Digital Clock Using Arduino OverviewIn this project, “Digital clock using Arduino” we will make a PCB board for digital clock an...
-
Bluetooth Controlled car using Arduino OverviewA Bluetooth Controlled Car Using Arduino is a fascinating DIY project that involves building...
-
Motor Driver Board using DRV8243 IntroductionThe DRV8243 is a highly integrated brushed DC motor driver IC from Texas Instruments, de...
-
12V Boost Converter USB Plug Using MT3608 IntroductionThe MT3608 is a popular step-up (boost) DC-DC converter IC that can efficiently convert ...
-
Smart Payment Display Using P10 LED Matrix and ESP12F IntroductionThe Smart Payment Display is an innovative system designed to automate and simplify paym...
-
ESP32-Based Review System IntroductionThe ESP32-based review system is a hardware and software solution designed to gather cus...
-
Design ATtiny1604 UPDI HV Programmer IntroductionThe ATtiny1604 is a microcontroller from Microchip’s tinyAVR series, and programming it ...
-
MX1508 motor driver module MX1508 motor driverThe MX1508 motor driver module is a small, low-cost module used to control DC mot...
-
MIDI FORGE Maestro - Wavetable Board emulated using Raspberry Pi Zero 2W
108 0 1 -
-
-
Gioia glittering fashion - 21 monocrome leds
279 0 1 -
-
-
-
Smart Environmental Badge for PCBWay’s 11th Anniversary – Monitor Temperature & Humidity
339 2 5