Apollo Guidance Computer Simulated Digital Indicator Display

This board is part of my open source Apollo Guidance Computer replica project: https://github.com/rrainey/DSKY-matic - This board drives an array of 180+ LEDs that simulate the electroluminescent display on the original AGC DSKY panel. Navigating the PCBA process was straightforward with a deep attention to detail by the PCBWay team. PCBWay questioned a detail that helped me spot a design problem ahead of manufacture. The boards The boards arrived on time with excellent shipping packaging. The overall quality of the boards was excellent -- all ten flashed and passed my initial testing with no flaws. PCBWay graciously offered to sponsor part of this manufacturing cost -- most appreciated.






Mar 17,2025
561 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Riley Rainey View Profile
7posts 0followers 0following
  • Comments(0)
  • Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    A very, very easy build, and the finished device works perfectly. Note that my photos show a previous generation of the 3D printed case which required a bit of manual trimming around the amp module.
    The speed at which these PCBs were built and shipped was extraordinary! In just 8 days, it was approved, built and shipped. The quality is also really precise and good, as always.
    Ottimo servizio, come sempre, molto veloci e veramente Professionali. Grazie e alla prossima
    This was my test piece to see if dimensions were accurate and the product fit well. The machining was spot on, the end result was perfect. I'll be looking to purchase more
    The design of this PCB, was born from the need to have a cover for our box, with different mountings and functions. This is just the first of a long series of different PCBs. The importance of the c...
    Ottimo servizio, come sempre, molto veloci e veramente Professionali. Grazie e alla prossima
    My project PCB was not such complex it was based on M1's Dock with Battery charging, protection and also Lora module. the PCBWay providing best sevices but they charge for 5PCS of PCB about $25 to $30...
    Fast and cheap! What else could I ask for? Will definitely do more business with PCBWay, even with the tariff wars going on!
    SHOW ME MORE
    OSZAR »